Skip to content
Toggle mobile menu
- On orders over $150 -
In Stock Orders Placed Within
Original OEM Books
Resources & Information
10 Yard Store
10 Yard Store
Hospitality / Contract
Denali Economy Vinyl
Exotic & Specialty Vinyl
Welt & Hidem
130 Automotive Welt
180 Automotive Welt
Seabrook Marine Welt
Seabrook Split Hidem
Seascape Marine Welt
Seascape Split Hidem
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
DAP Weldwood Contact Adhesive 1 GAL
Quantity in Stock:
(Out of Stock)
Care & Cleaning
Due to legal restrictions, this product cannot ship to the following:
Federal regulations prohibit the shipment of flammable products by air. They CANNOT be shipped by Next Day, 2nd Day, 3 Day or US MAIL services. These items can ONLY be shipped Ground.
These items can only be shipped within the USA. These items cannot be shipped Internationally.
**No returns accepted on this product.**
Contains Toluene, hexane, and acetone. Highly flammable liquid and vapor. Vapor may ignite explosively. Do not breathe vapors. Causes skin and serious eye irritation. May cause respiratory irritation. May cause drowsiness or dizziness, headache or nausea. May be harmful or fatal if swallowed and enters the airways. May cause damage to organs through prolonged or repeated exposure. Hexane exposure may cause nerve damage to arms and legs which may be permanent. Suspected of damaging fertility or the unborn child.
: Reports have associated permanent brain and nervous sustem damage with repearted and prolonged occupational overexposure to solvents. Intentional misuse by deliberately concentrating and inhaling vapors may be harmful or fatal.
Application for industrial use only:
READ SAFETY INSTRUCTIONS PANEL FIRST!
See technical bulletin for additional application information.
Extinguish pilot lights and eliminate other ignition sources.
Stir well before use.
Surfaces to be bonded must be clean, dry, and free of any loose material. The ambient air temperature, adhesive, and surfaces to be bonded must be at least 65°F 24 hours prior to use.
Wear gloves and safety glasses. Also wear respiratory protection if necessary.
Use a standard or hot spray system to apply an even coat to both surfaces.
Directly spray the adhesive perpendicular to the substrate to be bonded from approximately 6 inches away. One pass should give about 80% coverage which forms an effective bond. 100% coverage is recommended at the edges being bonded.
Allow both coated surfaces to dry for approximately 5 to 10 minutes before bonding. Dry time may vary with climate conditions. When the surfaces are sufficiently dry for bonding, the adhesive will adhere but not transfer to a gloved finger when touched. If the adhesive becomes too dry and will not bond, reactivate with a light coat of adhesive.
Align both pieces accurately. Contact adhesives bond instantly on contact and work cannot be shifted into place.
Use a hand roller (working from center to edge) or a pinch roller to apply pressure over the entire bond area to ensure positive contact.
Do not expose bonded parts to direct sunlight, excessive heat or excessive cold for at least 72 hours.
Do not use on copper, copper alloys, some vinyls or polystyrene foam. Test if unsure of compatiblity.
Ensure product is fully cured before vehicle, boat, etc. is released to customer.
: Tools, equipment, and spillage may be cleaned up with DAP Weldwood 0901 Solvent, toluene or xylene. DO NOT use solvents to remove product from skin.
Excellent for applications such as automotive or marine interiors, including headliners, vinyl trim, dash coverings, door coverings, floor coverings, panel coverings, and upholstery. Ideal for bonding Landau (vinyl) tops constructed of non-penetrable fabric backing and for van conversion.
*For industrial and professional use only.
Excellent heat resistance
12 month shelf life at 70°F
Up to 2 hours open time
May gel if stored at low temperatures but returns to normal viscosity at 70°F
Over-dried adhesive may be reactivated by applying another thin coat of adhesive.
Covers approximately 240 sqft per gallon
Ready to use as supplied. DO NOT THIN.
For the MSDS, click
EZE Spray Glue Gun with Aluminum Cup
Spray Glue Gun with Dripless Cup
$35.00 / Each
$40.90 / Each
Share your knowledge of this product.
Be the first to write a review »