Skip to content
Toggle mobile menu
- On orders over $150 -
In Stock Orders Placed Within
(Not Applicable on Weekends)
Original OEM Books
Resources & Information
10 Yard Store
10 Yard Store
Hospitality / Contract
Denali Economy Vinyl
Exotic & Specialty Vinyl
Welt & Hidem
130 Automotive Welt
180 Automotive Welt
Seabrook Marine Welt
Seabrook Split Hidem
Seascape Marine Welt
Seascape Split Hidem
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
Allante Automotive Vinyl Black
Quantity in Stock:15
Care & Cleaning
Allante's buttery-soft hand and textured surface emulate the feel and look of leather with a super dull finish designed to be low burnishing, non-polishing and resistant to UV light. Its superb tailoring qualities mean upholstery looks polished and perfect.
Manufactured to meet the following flammability requirements:
California Technical Bulletin 117 - 2013
BIFMA Class A
UFAC Class 1
IMO MSC 88/26/ADD.2
*This term and corresponding date refer to typical performance in the specific test indicated and should not be construed to imply the behavior of this or any other material under actual fire conditions.
This product has been developed to emulate the look and feel of soft leather. The unique super dull finish is designed to be low burnishing, non-polishing and resistant to ultra violet exposure. Allante vinyls have superb tailoring qualities, which make
pre-heating and steaming unnecessary and not recommended in the fabrication process. Because of the special leather-like
finish, additional precautions should be observed when
processing and cleaning. Please avoid contact with marking inks, glues and other staining materials that may damage vinyl during the manufacturing process. Protecting seating with a clean
polyethylene cover, as is common in the automotive industry, should enable you to deliver a stain free unit to the customer.
If despite all precautions, staining material does come in contact with Allante vinyls, cleaning should be immediate and should follow these instructions:
Dry Soil, Dust and Dirt, Dried on Dirt
: Remove with soft cloth
dampened with water.
Variation in Surface Gloss
: Wipe with a soft cloth dampened
with water. Allow to air dry
: Wash with a soft cloth moistened with a mild soap
and water. Rinse with clean water.
Stubborn Spots and Stains
: Spray with either Formula 409®, or
Tannery Car Care Cleaner®, wiping with a soft cloth. Rinse with
For Liquid Spills
: Wipe immediately with a clean absorbent cloth.
Rinse with clean water
Food, Grease, and Oily Stains
: Spray immediately using either
Formula 409®, or Tannery Car Care Cleaner®, wiping with a soft
cloth. Take care not to extend the area of contamination
beyond its original boundary. Rinse with clean water.
Allante Vinyls should be periodically cleaned to maintain their appearance and prevent build-up of dirt and contaminates. Any stain, spill or soiling should be cleaned up promptly to prevent the possibility of permanent staining. When cleaning, always rub gently.
Powdered abrasives, abrasive cleaners, and steel wool damage vinyl, as do strong solvents, lacquer solvents and inks. Lotions, suntan oil, waxes and polishes, etc., contain oils and dyes that can cause stiffening and staining of vinyls.
100% Polyester Backing
1.14 mm thick
100,000 Double Rubs (Wyzenbeek - #8 Cotton Duck)
1,000 Hours WeatherOmeter Resistance
40 yards on a roll
Sold by the yard
Share your knowledge of this product.
Be the first to write a review »